1991 V6 in Euro spec

Off topic chat about anything you like. Doesn't have to be about XMs (though they will inevitibly come up!). You can even discuss non-Citroens :o in here!
Post Reply
casalingua
Has changed a sphere or two
Posts: 290
Joined: Mon Dec 19, 2011 2:07 pm
Location: Denmark

1991 V6 in Euro spec

Post by casalingua »

Hello all:
I have my eye on a 1991 V6. It is a Euro market version which means it has the DIRAVI steering. That is marvellous. Less marvellous is the V6. Is that V6 the horror I suspect it is - or is it a matter of cambelt changes and checking the head gasket? Does anyone have any input on this? The reason I might be looking at this is that my wife hates the prospect of driving a UK model in Denmark because the steering while is on the "wrong" side. I found a champagne gold metallic V6 in Dormagen, Germany for a modest €1200 with about 110,000 miles on the odo. It even has the nice alloys seen on the promotional literature (which my 2.0 has). The other downside is I suddenly might have a spare car with nice new paint, generally good maintenance standards but some underbody rust a leaking pinion valve. Too good to throw away, costly to fix and impossible to sell here!
xmexclusive
Global Moderator
Posts: 5931
Joined: Wed Apr 15, 2009 8:11 am

Re: 1991 V6 in Euro spec

Post by xmexclusive »

V6 engine mods.
Timing case - RP 5168
Oil sump - RP 5201
Valve rockers (V6-24V) - RP 5163
Butterfly housings - RP 5282
Engine harness Gold plated connectors - RP 5188
ECU mods - RP 5215 (V6-24v has loom mods to match new ECU)
Cam followers - RP 5446
Long skirt pistons - by engine number.
18326 - V6 manual
37422 - V6 auto
3812 - V6-24v
Liner base seals - by engine number.
18762 - V6 manual
38756 - V6 auto
3736 - V6-24v

John
Dieselman
Global Moderator
Posts: 15297
Joined: Thu Jun 18, 2009 6:44 pm

Re: 1991 V6 in Euro spec

Post by Dieselman »

A 1991 V6 will be just fine. The cams are chain driven and the PRV engine is well tried and tested.

In your situation, I wouldn't think twice.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
casalingua
Has changed a sphere or two
Posts: 290
Joined: Mon Dec 19, 2011 2:07 pm
Location: Denmark

Re: 1991 V6 in Euro spec

Post by casalingua »

Hi: thanks for that. What does the long list in xmexclusive´s post mean?
What should I do with the existing car? It seems far too good to scrap. Would it interest a UK buyer perhaps - the spec is fairly rare, I think: 2.0 litre with the SEi trim. Weren´t most cars either above or below this leve: V6s with everything or 2.0 litres in Si trim (cloth, no aircon)?
Dieselman
Global Moderator
Posts: 15297
Joined: Thu Jun 18, 2009 6:44 pm

Re: 1991 V6 in Euro spec

Post by Dieselman »

The list is the engine modifications in production, by RP number.

The PRV engine was in production for about 20 years, so I wouldn't worry about a few mods fairly late on.

What age or RP is the car you are looking at?

Is your car a 2 lite N/a or turbocharged?

Petrol XM aren't worth a lot in the UK. I'd be tempted to keep it for spares. :oops:
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
Post Reply