Hi,
As above, I'm looking for a passenger-side wing mirror and a diesel auto instrument cluster for an S1.
I'm also after front and rear bumper brackets (cuts) as all four of mine are completely rotted out!
Thanks!
S1 Wing Mirror, Cluster and Panel Cuts WANTED!
-
nimspringus
- Can find the S1 radio
- Posts: 20
- Joined: Thu Sep 21, 2023 12:55 pm
-
Dieselman
- Global Moderator
- Posts: 15185
- Joined: Thu Jun 18, 2009 6:44 pm
Re: S1 Wing Mirror, Cluster and Panel Cuts WANTED!
What part of the cluster do you need, each gauge is separate. The only difference between manual and auto clusters is the gear selector Lcd display, for the auto and the back board that drives it.
I would just fabricate new bumper brackets, the chances of finding some in useable condition is very slim.
I would just fabricate new bumper brackets, the chances of finding some in useable condition is very slim.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
-
nimspringus
- Can find the S1 radio
- Posts: 20
- Joined: Thu Sep 21, 2023 12:55 pm
Re: S1 Wing Mirror, Cluster and Panel Cuts WANTED!
Preferably just looking for a whole unit as not much on mine works at all, not even the backlights!
-
Dieselman
- Global Moderator
- Posts: 15185
- Joined: Thu Jun 18, 2009 6:44 pm
Re: S1 Wing Mirror, Cluster and Panel Cuts WANTED!
The backlights are just regular incandescent bulbs, it's unlikely the cluster has caused the failure, much more likely the dimmer rheostat isn't connected.
If it is a failure of the circuit, it is most likely to be the solder joints on the connectors has cracked joints.
Due to the backlights being on all the time the ignition is on, it's common for many of the bulbs to be burned out.
If it is a failure of the circuit, it is most likely to be the solder joints on the connectors has cracked joints.
Due to the backlights being on all the time the ignition is on, it's common for many of the bulbs to be burned out.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
-
Southerneruk
- Has changed a sphere or two
- Posts: 418
- Joined: Thu Oct 15, 2015 11:47 am
- Orga / RP numbers: 1992 TD Auto Estate Green
- Contact:
Re: S1 Wing Mirror, Cluster and Panel Cuts WANTED!
Where about's are you nimspringus, I have loads of parts for mark 1, turbo, auto, estate. Come on down to west Southampton and have a look though what I have
-
nimspringus
- Can find the S1 radio
- Posts: 20
- Joined: Thu Sep 21, 2023 12:55 pm
Re: S1 Wing Mirror, Cluster and Panel Cuts WANTED!
I'd honestly love to, but I'm in Edinburgh so that's almost as far away as it's possible to get!