Wanted Turbo for 2.0 TCT

Selling off one (or bits :o) of your XM collection, or perhaps searching for those elusive headlight washer covers? This is the place to do it.
Post Reply
citroenxmtom
XM newbie
Posts: 4
Joined: Wed Jun 15, 2022 7:23 pm

Wanted Turbo for 2.0 TCT

Post by citroenxmtom »

Hi all, I'm in need of a replacement turbocharger for a TCT.

I've been on the forum for a couple of years but never posted before. Ive got a 1994 series 1.5 TCT prestige and I've been gradually sorting out the many issues i bought it with over the last 2 years.

Its now my main car doing a 60mile commute 4 times a week, but it has a badly cracked turbo exhaust housing that makes it quite noisy, especially at startup. A past owner/garage has already attempted to weld it and i've tried a temp fix with exhaust paste but it really needs replacing now.

I'm based in Liverpool but can travel to collect if anyone has one

Thanks
Tom
Dieselman
Global Moderator
Posts: 15297
Joined: Thu Jun 18, 2009 6:44 pm

Re: Wanted Turbo for 2.0 TCT

Post by Dieselman »

Member Degens is breaking a 2.0Tct that has just had a new turbo fitted.
viewtopic.php?f=11&t=10833
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
citroenxmtom
XM newbie
Posts: 4
Joined: Wed Jun 15, 2022 7:23 pm

Re: Wanted Turbo for 2.0 TCT

Post by citroenxmtom »

Thanks for the suggestion Deiselman. I have now obtained the replacement Turbo from Degens. Quite a job removing it but we managed eventually. Now its just finding time to fit it to mine....
Southerneruk
Has changed a sphere or two
Posts: 437
Joined: Thu Oct 15, 2015 11:47 am
Orga / RP numbers: 1992 TD Auto Estate Green
Contact:

Re: Wanted Turbo for 2.0 TCT

Post by Southerneruk »

When you come to fit it, You might find it easier coming in from the underneath from the front end of the car, and sliding back to the cross-member, i found it a lot easier doing it that way, than trying to fit from the top
Post Reply