Re: My Citroen XM Prestige
Posted: Sat Jan 30, 2016 5:22 pm
Evening gents
Both new strut tops have now been sourced (thank you John!), modified and fitted, I'm pleased to report all is well.
A pair of new bottom ball joints from a decent manufacturer have also been fitted as the others were shot to bits.
I have some good photos of the conversion and some details on why it is important to remove strut tops to check their condition but due to technical difficulties where my camera won't talk to this useless android tablet they will have to wait for a while.
The other important thing is I have sorted the dull brakes that would shudder when coming to a stop from a slow crawl, a perfectly clean brake pad locating cutout in the carrier is what is required to sort the problem and carefully use of a grinder was needed to take them back to bare metal and some copper grease applied to aid their movement and prevent further corrosion, also bled the abs block and now the brakes are sharp as a pin again.
Full pictorial update to follow when I get time, for now the XM has returned to road readiness.
D
Both new strut tops have now been sourced (thank you John!), modified and fitted, I'm pleased to report all is well.
A pair of new bottom ball joints from a decent manufacturer have also been fitted as the others were shot to bits.
I have some good photos of the conversion and some details on why it is important to remove strut tops to check their condition but due to technical difficulties where my camera won't talk to this useless android tablet they will have to wait for a while.
The other important thing is I have sorted the dull brakes that would shudder when coming to a stop from a slow crawl, a perfectly clean brake pad locating cutout in the carrier is what is required to sort the problem and carefully use of a grinder was needed to take them back to bare metal and some copper grease applied to aid their movement and prevent further corrosion, also bled the abs block and now the brakes are sharp as a pin again.
Full pictorial update to follow when I get time, for now the XM has returned to road readiness.
D