Page 6 of 10
Re: 1994 VSX CT auto BREAKING
Posted: Sun Jun 23, 2024 9:26 pm
by Citjon
Citjon wrote: Fri Jun 21, 2024 7:05 am
Southerneruk wrote: Thu Jun 20, 2024 9:52 am
Do have the bits between the aerial and car roof, need to be careful when removing it as an expansion peg that needs to be taken out first, you can get to that from inside the car and removing the light panel where the motor and gearing for the sunroof, remove the peg before removing the cable and undoing the nut
They should still be on the car, I'll have a look
I've dropped the sunroof motor but can't see the underside of the aerial. Did you mean the complete sunroof mechanism?
DSC_9141_1.JPG
Re: 1994 VSX CT auto BREAKING
Posted: Mon Jun 24, 2024 6:21 am
by Dieselman
The aerial is accessed via the centre sun-blind.
Re: 1994 VSX CT auto BREAKING
Posted: Mon Jun 24, 2024 7:04 am
by Citjon
Thanks Will, I thought it was a bit extreme dropping the whole thing just for the aerial.
Re: 1994 VSX CT auto BREAKING
Posted: Tue Jun 25, 2024 12:38 am
by Southerneruk
Follow the aerial cable,
Re: 1994 VSX CT auto BREAKING
Posted: Sun Aug 04, 2024 4:36 pm
by wesacosa
Hi. Did you get a chance to look at the side window channel plastic clips to see if they are in a usable condition?
Re: 1994 VSX CT auto BREAKING
Posted: Mon Aug 05, 2024 5:52 pm
by Citjon
wesacosa wrote: Sun Aug 04, 2024 4:36 pm
Hi. Did you get a chance to look at the side window channel plastic clips to see if they are in a usable condition?
I haven't yet but the door card is off so I'll try and get a look at it this week. How many clips do you need?
Are you still after a NSF window regulator as well?
Re: 1994 VSX CT auto BREAKING
Posted: Mon Aug 05, 2024 9:29 pm
by wesacosa
one clip would be great but I'd probably take a second if you had it. I could potentially use a working passenger front regulator too depending on price (I think mine just needs a new cable but given thats a bit of a fiddly job I could be persuaded to get a working replacement
)
Re: 1994 VSX CT auto BREAKING
Posted: Thu Aug 08, 2024 9:10 am
by Southerneruk
How did you get on removing the plastic bits and base to the ariel, you have the bit with the nut and bolt, and about an inch behind that you have an expanding lug, it is this bit you need to be careful with, it breaks very easy if you do not see it or realise it is there
Re: 1994 VSX CT auto BREAKING
Posted: Thu Aug 08, 2024 7:05 pm
by Citjon
I had a go but the light wasn't very good. Hoping to get chance this weekend to remove a few other bits
Re: 1994 VSX CT auto BREAKING
Posted: Thu Aug 15, 2024 3:00 pm
by Citjon
wesacosa wrote: Mon Aug 05, 2024 9:29 pm
one clip would be great but I'd probably take a second if you had it. I could potentially use a working passenger front regulator too depending on price (I think mine just needs a new cable but given thats a bit of a fiddly job I could be persuaded to get a working replacement
)
Window regulator and clip removed today if you would like to pm me. Just need to check it works.
DSC_9459_1.JPG
DSC_9457_1.JPG
)