Page 5 of 6
Re: Breaking : 1993 2.1 SED Auto
Posted: Mon Jun 01, 2015 1:31 pm
by cxprestigeauto
Justin, aiming to be down on Saturday 20 June for some stripping and cutting!!
Rob
Re: Breaking : 1993 2.1 SED Auto
Posted: Thu Jun 04, 2015 11:21 am
by jeastham
cxprestigeauto wrote:Justin, aiming to be down on Saturday 20 June for some stripping and cutting!!
Rob
That should be fine. What sort of time do you have in mind?
Justin
Re: Breaking : 1993 2.1 SED Auto
Posted: Thu Jun 04, 2015 3:37 pm
by southerner
Shame wrong type of alloy's, i have the 10 straight spoke type
Re: Breaking : 1993 2.1 SED Auto
Posted: Thu Jun 04, 2015 8:33 pm
by cxprestigeauto
jeastham wrote:cxprestigeauto wrote:Justin, aiming to be down on Saturday 20 June for some stripping and cutting!!
Rob
That should be fine. What sort of time do you have in mind?
Justin
Nothing too early. I spend the week with the alarm going at 05:45!
Get to you for around 11:00? Can easily be sooner if that fits your plans.
PM me your address and a mobby number.
Rob
Re: Breaking : 1993 2.1 SED Auto
Posted: Thu Jun 04, 2015 8:35 pm
by cxprestigeauto
Forgot to say. If anyone want anything off the car and is put off by the epic trip to Cardiff
I am happy to strip stuff and bring it back to civilisation.
I am in Oxfordshire 5 days a week and go through the delightful M4/A34 interchange at Chievely every day.
Rob
Re: Breaking : 1993 2.1 SED Auto
Posted: Fri Jun 19, 2015 7:03 pm
by cxprestigeauto
Last call for any bits off Justin's car.
I will be there at 10:00 Saturday morning.
Rob
Re: Breaking : 1993 2.1 SED Auto
Posted: Fri Jun 19, 2015 7:11 pm
by kingp
Is there anything left on it?!?
Re: Breaking : 1993 2.1 SED Auto
Posted: Fri Jun 19, 2015 7:12 pm
by xantia_v6
cxprestigeauto wrote:Last call for any bits off Justin's car.
I will be there at 10:00 Saturday morning.
Rob
I am still after a plastic hinge pin for the internal rear window, and any decent length of door trim strip to cut down for a front wing.
I am not sure when I will next be in the UK, but maybe they are light enough to post?
Re: Breaking : 1993 2.1 SED Auto
Posted: Fri Jun 19, 2015 8:00 pm
by cxprestigeauto
I will look those out if available!
They are both light and postable.
Rob
Re: Breaking : 1993 2.1 SED Auto
Posted: Mon Jun 22, 2015 2:21 pm
by jeastham
kingp wrote:Is there anything left on it?!?
LOADS !!