citroenxm wrote: Wed Jun 30, 2021 5:08 pm
I've still been a tooth out with pins in. But I think only I can manage that..
Only on initial fitment, you won't be able to refit the pins after rotating the engine two turns.
It's due to the fuel pump pulley rocking backwards, allied to not enough tension on the front side of the belt when installing, thus the front run being one tooth out.
If necessary, when fitting the belt onto the pump pulley, rotate the pump forwards while still pinned, to ensure the belt is tight along its front run.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
Stickfinger wrote: Thu Jul 01, 2021 1:25 pm
I know I know....you want it to start !..BUT
There are things that need doing whilst it still has big parts out of the way....
20210701_131019[1].jpg
That is better
20210701_135252[1].jpg
That looks like an e-crofting diode kit was fitted to the loom.
Have you removed it and fitted a pair of diodes now?
It looks like the terminals are still there, so maybe not.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
They are just two diodes inside an enclosure, so I would simply solder a pair of diodes into the loom, then remove the excess wire and box.
By the look of things you should be filling your garage with evil diesel smoke very soon.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
If you do fit a couple of diodes instead, make sure they're the right way round: cathode (the band) to the ECU cable, other end to a good Gnd. 400v 6A is a sturdy rating.
Chris 1996 XM 2.5TD Exclusive RP7165 Polar White 1992 BX19D Millesime RP5800 Sable 1989 BX19RD Delage Red Deceased; 1998 ZX 1.9D Avantage auto Triton Green Company car 1998..2001; 2001 Xantia 1.8i auto Wicked Red Company car 2001..2003
Those pesky brake calipers can be hard, when the socket slips off the bolt.
Best remove them...who needs brakes...
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
