Page 3 of 4
Re: Odds and ends wanted- can collect at CXM?
Posted: Sun Aug 18, 2013 9:43 pm
by citroenxm
Should not be a problem at all pleanty of us there to do it me included..ill try and get my tool box in..
Posted: Mon Aug 19, 2013 7:25 am
by Eddie nuff
mds141 wrote:Are headlamps difficult to swap over?
I'll just watch whilst you change the NS onto the OS and vice-versa. Should be funny.
Sorry! 
I'll get my coat.
Re: Odds and ends wanted- can collect at CXM?
Posted: Mon Aug 19, 2013 12:11 pm
by CitroJim
citroenxm wrote:Should not be a problem at all pleanty of us there to do it me included..ill try and get my tool box in..
Paul, if you want to save vital space in yours then leave your tools at home as I'll be well tooled up. If we need anything special I can always nip home and get it...
Eddie nuff wrote:mds141 wrote:Are headlamps difficult to swap over?
I'll just watch whilst you change the NS onto the OS and vice-versa. Should be funny.
Sorry! I'll get my coat.
How to make a cross-eyed XM...
Re: Odds and ends wanted- can collect at CXM?
Posted: Mon Aug 19, 2013 3:48 pm
by russ92xmsed
Mark, they are very straight forward...it's all bolts really. Having just done mine, its fresh in my mind. Only difficult bit was a bolt under the units which holds the horn brackets.
Re: Odds and ends wanted- can collect at CXM?
Posted: Mon Aug 19, 2013 5:00 pm
by citroenxm
Ah ha.. then we can all stand and laugh while watching russ do a lamp swap.
Pop side lamps out.. remove nose conee. The yes three 10mm bolts. Two obvious one hidden and pita to undo easyilly..
Re: Odds and ends wanted- can collect at CXM?
Posted: Mon Aug 19, 2013 6:31 pm
by mds141
Cheers guys. I'm aiming to arrive at LIttle Horwood on Friday afternoon. Appreciate any offers of help.
Re: Odds and ends wanted- can collect at CXM?
Posted: Mon Aug 19, 2013 6:32 pm
by citroenxm
Im there ALL weekend, from friday later on.. most likely around 5pm or so..
Re: Odds and ends wanted- can collect at CXM?
Posted: Mon Aug 19, 2013 7:42 pm
by russ92xmsed
citroenxm wrote:Ah ha.. then we can all stand and laugh while watching russ do a lamp swap.
Pop side lamps out.. remove nose conee. The yes three 10mm bolts. Two obvious one hidden and pita to undo easyilly..
Excuse me...what are you implying!!!
I changed them very quickly thank you!!!!
Mind you...there will be swearing!
Mark I will be there Friday afternoon. I think we're aloud on site from three?
I can help advise...
Re: Odds and ends wanted- can collect at CXM?
Posted: Mon Aug 19, 2013 7:45 pm
by Duke
russ92xmsed wrote:Mark I will be there Friday afternoon. I think we're aloud on site from three?
If you say so Russ...
Not sure what time we're getting there on the Friday yet, although as you know not too much goes on on Friday...
But yes, from about 3-4ish onwards would be best as we've got to set up etc...
Re: Odds and ends wanted- can collect at CXM?
Posted: Mon Aug 19, 2013 7:50 pm
by russ92xmsed
Do you know, I'm sure I read from three a clock. Ah well!
Last year there were a load of people already there and set up, when we arrived at 2:30 ish.