Page 2 of 4
Re: WANTED V6-24v parts required.
Posted: Sun Jul 09, 2017 1:35 pm
by Dieselman
No problem on the badges, they are the last thing on my shopping list.
Re: WANTED V6-24v parts required.
Posted: Sun Jul 09, 2017 1:48 pm
by citroenxm
Ill check stock levels if i have one for each side and find a third then no problem..
Re: WANTED V6-24v parts required.
Posted: Sun Jul 09, 2017 3:06 pm
by Dean
Paul, when rummaging through the stock if you come across the little air pipe that goes between the air box and the ICV valve could you let me know, also one of the clips that goes onto that pipe and up to the hydraulic suction pipe to hold it up, i have been unable to find them on the open market so far.
D
Re: WANTED V6-24v parts required.
Posted: Sun Jul 09, 2017 4:37 pm
by citroenxm
There was one on yog was there not dean? You mean the small diamiter pipe from the back of the air filter to the valve on the back of the inlet..??
Re: WANTED V6-24v parts required.
Posted: Sun Jul 09, 2017 5:19 pm
by Dean
Thats the one Paul, no it was missing from YOG and i never found one in the car either.
D
Re: WANTED V6-24v parts required.
Posted: Thu Jul 13, 2017 1:27 pm
by Dieselman
Wanted.
V6 ECU plastic box. Don't need the lid or relay cover.
Re: WANTED V6-24v parts required.
Posted: Thu Jul 13, 2017 6:33 pm
by citroenxm
Bloody hell will.. ive been to the farm tonight.. got your other stuff.. loads of ecu boxs but wont get one for you now..
Re: WANTED V6-24v parts required.
Posted: Fri Jul 14, 2017 12:39 pm
by Dieselman
No rush, just the rear location spigot broken off.
Re: WANTED V6-24v parts required.
Posted: Fri Jul 14, 2017 8:13 pm
by citroenxm
Like most.. but i think ive some unbroke ones but will need to check on that..
Re: WANTED V6-24v parts required.
Posted: Fri Jul 14, 2017 8:34 pm
by Dean
They all do it, you are better off fitting an M8 roofing bolt with lock nut on the back and cut to length.
D