Page 2 of 2
Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg
Posted: Mon Apr 11, 2016 7:29 am
by jamesnoble
Fantastic John. Very happy with second hand as I can repaint. Can you PM with price etc.
Many Thanks
James
Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg
Posted: Mon Apr 11, 2016 9:38 am
by citroenxm
jamesnoble wrote:Unless James has installed an airbag warning lamp into the dash cluster.
All S2 circuits remain so the cars original (S2) instrument cluster is used; they are the same basic item is S1 but internals change. For example the ES9 V6 incorporates oil temp guage as well as airbag warning light. Same for dot matrix etc.
Ah but switch gear is all different.. So did you swap harnesses or just plugs???
Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg
Posted: Mon Apr 11, 2016 12:05 pm
by jamesnoble
Just the plugs for the switches, some wires required lengthening. Otherwise the harness is unmodified
Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg
Posted: Mon Apr 11, 2016 9:30 pm
by jamesnoble
xmexclusive wrote:Have a number of spare tow eye covers.
Will part with any colour other than green ones and the primer set still in the Citroen bag.
John
Hi John
Do let me know how much you want for a second hand set; any colour you like.
James
Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg
Posted: Fri Apr 15, 2016 7:02 am
by jamesnoble
jamesnoble wrote:I love my XM!
Mk2 under front bumper towing eye covers (drivers side needed but will take both if you have them)
Mk1 Leather Single spoke steering wheel (I currently have a non leather single spoke wheel fitted)
Genuine Citroen carpet overmats in black (front and rear). Second hand is fine as long as they have some life left in them
Hope you can help me. I know these parts are difficult to find.
James
So I now have towing eye covers on the way: Thank you!
Can any body help with the steering wheel and overmats?
James
Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg
Posted: Fri Apr 15, 2016 8:21 am
by MTXM
Hi James,
The leather single spoke steering wheels were only fitted on V624v between 1990-92 and 12v 1991-92 and are therefore pretty rare and you might be better off looking abroad - as I recall Frederick in France who occasionally frequents the Forum did have one for sale. Any genuine overmats are also likely to be secondhand and probably a bit worse for wear, but good luck in your search. It will be very interesting to see the finished project and I remember meeting you at the 25th rally and admiring your CX!
With regards,
Matthew T.