Page 2 of 2

Re: Breaking - XM 2.0 16v Silver MK2.

Posted: Sun Aug 14, 2011 9:11 pm
by Dieselman
Duke wrote:
Unfortunately the strut tops are rusty Will. :cry:
They don't look bad at all. how rusty an is the rubber delaminating?

Re: Breaking - XM 2.0 16v Silver MK2.

Posted: Mon Aug 15, 2011 6:05 pm
by humphrey23
Hi, have you the rhs front and rear window motors?
Thanks

Re: Breaking - XM 2.0 16v Silver MK2.

Posted: Mon Aug 15, 2011 7:37 pm
by Duke
Dieselman wrote:They don't look bad at all. how rusty an is the rubber delaminating?
...they are bad! Rusty and rubber starting to peel off, just looked.
humphrey23 wrote:Hi, have you the rhs front and rear window motors?
...yes, the front one is available but the rear window is not electric I'm afraid.

Re: Breaking - XM 2.0 16v Silver MK2.

Posted: Sat Aug 20, 2011 1:50 pm
by red_dwarfers
Very secure!

Thanks for looking anyway.

Re: Breaking - XM 2.0 16v Silver MK2.

Posted: Sat Aug 27, 2011 10:21 pm
by Duke
BUMP!

Some parts can be taken to the CX, XM and Xantia Rally next weekend! :)

Be quick though, as the XM will be going to scrap soon.

Re: Breaking - XM 2.0 16v Silver MK2.

Posted: Sat Aug 27, 2011 10:47 pm
by cxprestigeauto
Duke wrote: Be quick though, as the XM will be going to scrap soon.
Your favourite trip for any XM, Franklin!

Re: Breaking - XM 2.0 16v Silver MK2.

Posted: Sun Aug 28, 2011 7:38 am
by robert_e_smart
Hi Franklin,

Can you stick a wedge of wood between the suspension strut and body of the car, so you can keep the car mobile for loading, without the strut tops. It would be good to avoid them going to scrap as well.

Re: Breaking - XM 2.0 16v Silver MK2.

Posted: Mon Aug 29, 2011 8:55 am
by juggernaut-j
hi i could use all the wheel bolts, i have just got a full set of speedlines like the ones on your car, mine is fitted with after market wheels which i dont like and the wheel bolts dont fit the speedlines ive got, i would also take one wheel that i could use as a spare so i wont have problems if i have a puncture
regards john