Citroen XM Forum

Hi Dave

I will look one out as I think there are two seperate bits and it is the fixing surround that breaks not the nozzels.

John

davetherave wrote:

Jorgy, your covers are ready,
Cheers
Dave

Thanks Dave, have replied to your pm.
G

If anyone wants a pair to collect at the national rally let me know so I can make some more if needed.
Currently have 4 pairs ready.
Cheers
Dave

I bought the 1st pair from Dave and can confirm they're great quality.

I've now painted them and they're ready to go on the car. Will post photos asap.

cheers
George

Will be bringing these to the Cxm too.

Hi Dave,
I've tried sending a PM but got no reply so I'm worried that perhaps you're no longer an active XM-er, but here goes anyway. Are you still making and selling replica covers for the lamp washers and if so, could I buy a N/S one as soon as possible, please? You can email me direct at williams.mark1@gmail.com if you're prefer the direct approach!
Cheers – Mark

Hi Dave,
I've tried sending a PM but got no reply so I'm worried that perhaps you're no longer an active XM-er, but here goes anyway. Are you still making and selling replica covers for the lamp washers and if so, could I buy a N/S one as soon as possible, please? You can email me direct at williams.mark1@gmail.com if you're prefer the direct approach!
Cheers – Mark

markysimon wrote:Hi Dave,
I've tried sending a PM but got no reply so I'm worried that perhaps you're no longer an active XM-er, but here goes anyway. Are you still making and selling replica covers for the lamp washers and if so, could I buy a N/S one as soon as possible, please? You can email me direct at williams.mark1@gmail.com if you're prefer the direct approach!
Cheers – Mark

Hi Mark,
Dave still has an XM IIRC and is an active forum member, he may still have a pair of these covers available or possibly even Martin has a N/S one too if you read thro' THIS thread

Good luck !

XMX

Hi Mark,
Dave still has an XM IIRC and is an active forum member, he may still have a pair of these covers available or possibly even Martin has a N/S one too if you read thro' THIS thread

Good luck !

XMX

Many ta's for that: In fact Dave did respond to my PMs – he was delayed by a house move, poor soul – and is going to have a look for one when the dust's settled. In the meantime I've taken your advice and PM'd Martin just to be on the safe side! Still searching for the bottom covers on the valance, though.

Cheers – Mark

Dave,

These look really good! Just out of interest - and so the possibility of other parts could be looked at - what sort of process is involved for you in creating the mould, and then getting the items injected/set/whatever? What material does the end-product consist of? PM me, if you prefer.

Chris