Page 2 of 2
Re: Does anyone have one of these
Posted: Fri Sep 10, 2010 9:07 am
by citroenxm
I think this part is a STANDARD clutch part for ALL manual models due to the angle of the operation... so if we all who own MANUAL XM's EXCEPT 2.5 TD owners oerder one, we should be on a winner...
Its funny Ken, at CXM this weekend I was JUST told that that part is a common break point!!
Id order one too for me S1 24v XM... so count me in too colin!!
Paul
Re: Does anyone have one of these
Posted: Fri Sep 10, 2010 9:16 am
by kenhall
Hi Colin,
I would be interested in one of these, although I don't fancy the idea of aluminium and would prefer stainless steel or solid brass construction.
Ken
Re: Does anyone have one of these
Posted: Fri Sep 10, 2010 12:55 pm
by colinxm
Yes please Ken
I'll pm my address to you. I don't think it'll even need a brass bush if I make them from 316 stainless - should pivot quite nicely on the original pin (I'm assuming that the original pin is case hardened as a cage roller bearing is running on it - if not I'll be introducing bronze bushes so's not to wear the pin out
)
Cheers, Colin.P
Re: Does anyone have one of these
Posted: Fri Sep 10, 2010 1:20 pm
by messerschmitt owner
Colin, as per our PMs - can I have two, please.
Re: Does anyone have one of these
Posted: Sun Sep 12, 2010 3:43 pm
by savoy
PLEASE SEND ME VIN NUMBER AND MODEL,I HAVE A NEW CABLE HERE FOR AN XM.
REGARDS SAVOYGARAGE.CO.UK
clutch cable "quadrant" update
Posted: Thu Sep 30, 2010 12:35 pm
by colinxm
Hi all, I've managed to find my old clutch cable to use as a pattern for the quadrant, I've done the programming so all being well I'll get some produced from stainless 316 at the weekend for those still interested. I'll put up some pics when completed.
Colin.P
Re: clutch cable "quadrant" update
Posted: Thu Sep 30, 2010 12:41 pm
by messerschmitt owner
colinxm wrote:Hi all, I've managed to find my old clutch cable to use as a pattern for the quadrant, I've done the programming so all being well I'll get some produced from stainless 316 at the weekend for those still interested. I'll put up some pics when completed.
Colin.P
yes, still interested!
Thanks
Re: Does anyone have one of these
Posted: Thu Oct 07, 2010 8:28 pm
by colinxm
Hi all, Pics have been put on the list now. Please take a look in the "general free-for-all discussion" section.
Cheers, Colin.P