Citroen XM Forum

Peter.N. wrote:Perhaps it was because I tried in cold weather but it snapped into several pieces.

XMX wrote:Hi George,

jorgy wrote:................... It's for an S2 bumper, but S1 or S2 will do, shape and fittings r looking identical, have checked.[/b]

Please be aware that the S1/1.5 front bumper trim is NOT compatible with an S2 model (the S2's are slightly longer in length on the outer N/S and O/S 'Hockey stick Sections') also IIRC the under side clipping point lugs are in different locations too !

However I can confirm that the rear bumpers and trims are identical between the S1/1.5 and S2 model's (For both saloon to saloon and estate to estate) if you had the need to change those between early/later model's.

jorgy wrote:.......................
If not, anybody got a centre piece from a headlight-washer model they want to get rid of?
Please answer here or email me, my pm never worked properly.
thanks
George

I do however have available all three trim section's from an S2 front bumper from a headlamp jet-wash model
(middle section plus N/S & O/S 'Hockey stick' section's) with no cracks but with poor contaminated chrome finish.

So if that's what you need ? I can oblige your request, E-Mail sent !



XMX