3.0 V6-24 Project
-
- Global Moderator
- Posts: 13818
- Joined: Thu Jun 18, 2009 6:44 pm
Re: 3.0 V6-24 Project
Thanks Richard. Just as the 12v, it would be possible to do that on the 24v, using a multi-ribbed pulley.
For now, the issue is resolved.
For now, the issue is resolved.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: 3.0 V6-24 Project
Very early xantias used a sinker system.. and a milti ridged pully pump too... so.. in theroy not too hard. . But working out the belt length to suit the smaller size pully on the pump compared to the air con pully would need dooing.. however.. petrol models used a much larger pully pump. Im not sure i have one as a sinker pump now..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
-
- Global Moderator
- Posts: 13818
- Joined: Thu Jun 18, 2009 6:44 pm
Re: 3.0 V6-24 Project
Can someone with a PRV6-24 please take a picture of the top mounted ACAV valve and post it up...Matthew, Paul?
I need a valve but sourcing one is proving difficult. I have possibly found a stock of the lower valve, and believe mine had been exchanged with a lower one previously, which I have now refitted to the lower position
I need a valve but sourcing one is proving difficult. I have possibly found a stock of the lower valve, and believe mine had been exchanged with a lower one previously, which I have now refitted to the lower position
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
- MTXM
- Citroen God!
- Posts: 4895
- Joined: Mon Apr 20, 2009 8:45 pm
- Location: Aylsham Norfolk
Re: 3.0 V6-24 Project
Please excuse my ignorance Will, but what and where is the ACAV valve - is it the idle valve ? I am sure that I can then oblige with a picture as requested. With regards, Matthew T.
1989 V6 Exclusive (Poland car) - Now living in a local Motor Museum!
1990 V6sei auto (grey auto)
1990 V6sei manual (gold car)
1990 V6.24 Pallas (Germany car)
1990 V6.24v (Scotland car)
Other previous XM sold and broken too many to mention!
1990 V6sei auto (grey auto)
1990 V6sei manual (gold car)
1990 V6.24 Pallas (Germany car)
1990 V6.24v (Scotland car)
Other previous XM sold and broken too many to mention!
- MTXM
- Citroen God!
- Posts: 4895
- Joined: Mon Apr 20, 2009 8:45 pm
- Location: Aylsham Norfolk
Re: 3.0 V6-24 Project
Like this possibly?
You do not have the required permissions to view the files attached to this post.
1989 V6 Exclusive (Poland car) - Now living in a local Motor Museum!
1990 V6sei auto (grey auto)
1990 V6sei manual (gold car)
1990 V6.24 Pallas (Germany car)
1990 V6.24v (Scotland car)
Other previous XM sold and broken too many to mention!
1990 V6sei auto (grey auto)
1990 V6sei manual (gold car)
1990 V6.24 Pallas (Germany car)
1990 V6.24v (Scotland car)
Other previous XM sold and broken too many to mention!
-
- Global Moderator
- Posts: 13818
- Joined: Thu Jun 18, 2009 6:44 pm
Re: 3.0 V6-24 Project
Hi Matthew, that's the idle control valve. The ACAV valve is the smaller solenoid valve to the left of the idle control valve, mounted on top of the plenum.
It will be similar (possibly the same, bar connector colour) as this one.
It will be similar (possibly the same, bar connector colour) as this one.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: 3.0 V6-24 Project
Remove the black cover that houses the ht leads.. under there ontop of the inlet manifold are two bellows.. they are connected to manifold butterflies inside.. controled by electro vaccum valves.. one opens at one set rpm the second later on. They change the inlet air chamber for air flow.. more air more power. Im guessing changing the mainifold to a straighter intake for the high power output..
Sorry will im not near mine..
Sorry will im not near mine..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: 3.0 V6-24 Project
These are the acavs .. best shot i think i have of them from previous..
You do not have the required permissions to view the files attached to this post.
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
- MTXM
- Citroen God!
- Posts: 4895
- Joined: Mon Apr 20, 2009 8:45 pm
- Location: Aylsham Norfolk
Re: 3.0 V6-24 Project
I hope that these photos are helpful to you Will and that the correct part can be located. With regards, Matthew T.
You do not have the required permissions to view the files attached to this post.
1989 V6 Exclusive (Poland car) - Now living in a local Motor Museum!
1990 V6sei auto (grey auto)
1990 V6sei manual (gold car)
1990 V6.24 Pallas (Germany car)
1990 V6.24v (Scotland car)
Other previous XM sold and broken too many to mention!
1990 V6sei auto (grey auto)
1990 V6sei manual (gold car)
1990 V6.24 Pallas (Germany car)
1990 V6.24v (Scotland car)
Other previous XM sold and broken too many to mention!
-
- Global Moderator
- Posts: 13818
- Joined: Thu Jun 18, 2009 6:44 pm
Re: 3.0 V6-24 Project
Thanks Matthew, your picture tells me what I need to know.
The rear one is p/n 036338 and it has a brown connector and central stub projecting. The upper one is p/n 036322 with green connector and no stub projecting.
It's of a bit convoluted story, but on my car the upper one had been replaced with 036338 and the stub was fouling the idle valve connector to the point of chafing the wiring. The rear one had gone open circuit so I stripped off the plenum unit and fitted the upper one in it's place.
Both these valves are NFP, but having not seen a 036322 I couldn't see what the difference was.
I've ordered one for a Vauxhall Insignia to fit until I can find an original part...here's hoping it will actually work that long.
The rear one is p/n 036338 and it has a brown connector and central stub projecting. The upper one is p/n 036322 with green connector and no stub projecting.
It's of a bit convoluted story, but on my car the upper one had been replaced with 036338 and the stub was fouling the idle valve connector to the point of chafing the wiring. The rear one had gone open circuit so I stripped off the plenum unit and fitted the upper one in it's place.
Both these valves are NFP, but having not seen a 036322 I couldn't see what the difference was.
I've ordered one for a Vauxhall Insignia to fit until I can find an original part...here's hoping it will actually work that long.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White