Page 3 of 67
Re: Hello Chaps....new owner
Posted: Mon Jan 18, 2021 4:51 pm
by Stickfinger
Ye3s, all the bits (cam pulley is here, belts tension wheels) are here or arrive by the weekend......I hope to have it started next week.
I have a LHM pump union seal to do as well....but it is only a weep but needs to be done before it destroys the alternator.
Re: Hello Chaps....new owner
Posted: Mon Jan 18, 2021 5:15 pm
by citroenxm
Those 6 and 2 pump are same as xantia .. the large. O ring gives on the suspension output.. not a too bad a job to do not sure where else other then dealer you can get the O ring from..
Re: Hello Chaps....new owner
Posted: Tue Jan 19, 2021 7:58 am
by Dieselman
The O ring is probably cheap enough from the dealer, but any seal stockist should be able to supply one of the correct size.
Re: Hello Chaps....new owner
Posted: Tue Jan 19, 2021 9:35 am
by citroenxm
Yes course. But you know as well as me it will become nfp .. the last lhm cars using this type of pump is now 20 years old..
Re: Hello Chaps....new owner
Posted: Tue Jan 19, 2021 9:37 am
by White Exec
Parts diagram...
6plus2 HPP parts.JPG
Re: Hello Chaps....new owner
Posted: Tue Jan 19, 2021 7:43 pm
by Stickfinger
Cheers...
Re: Hello Chaps....new owner
Posted: Wed Jan 20, 2021 2:21 pm
by Stickfinger
Bits coming in one at a time
20210120_135133.jpg
Re: Hello Chaps....new owner
Posted: Wed Jan 20, 2021 6:34 pm
by Stickfinger
bugger I ordered the wrong tensioner......re-ordered the correct one
Re: Hello Chaps....new owner
Posted: Sat Jan 23, 2021 5:00 pm
by Stickfinger
Ummmm, this did not help things
20210123_142358.jpg
20210123_143442.jpg
Re: Hello Chaps....new owner
Posted: Sat Jan 23, 2021 5:26 pm
by White Exec
Nasty!