Page 1 of 1

XM parts mk 1

Posted: Fri Jul 18, 2014 2:21 pm
by southerner
Who was it that wanted the heating control board, i have now removed it from consul.
Many other parts still still available

Re: XM parts mk 1

Posted: Sat Jul 19, 2014 7:52 pm
by Narinder
Hi, do you have the central locking mechanism for the drivers side rear and front doors?
Thanks

Re: XM parts mk 1

Posted: Sun Jul 20, 2014 12:16 am
by southerner
I do, I will pull it all out for you, but check if you can to see if its door locking servo unit or the black control box under steering wheel

Re: XM parts mk 1

Posted: Sun Jul 20, 2014 5:10 pm
by Dieselman
A 1991 car uses the black box under the drivers dash area.

Re: XM parts mk 1

Posted: Tue Jul 22, 2014 11:53 pm
by southerner
Dieselman is there a box that controls the ignition under the dash board

Re: XM parts mk 1

Posted: Wed Jul 23, 2014 5:01 pm
by Dieselman
southerner wrote:Dieselman is there a box that controls the ignition under the dash board
Only the ignition switch.

Re: XM parts mk 1

Posted: Wed Jul 23, 2014 6:37 pm
by Narinder
Hi Apologies for the delay. I will be working on the doors this weekend to grease up the window guides as they are slowing up. Will have a look and maybe send some pics so we are talking about the same thing. The current issues are: rear drivers side door doesnt not respond at all on central locking. The drivers door locks all the doors when the key is turned but none of the other doors respond when I try to unlock. The drivers door unlocks obviously but no signal seems to go out to any of the other doors. Could be electrical problem, dismantling may nudge it all into working but I'll see.....

Ta

Re: XM parts mk 1

Posted: Wed Jul 23, 2014 11:32 pm
by southerner
ok let us know as soon as you know

Re: XM parts mk 1

Posted: Wed Jul 30, 2014 9:43 pm
by Narinder
Hi, been ill for a few days. Im selling the XM now but still need to get it in top shape for the next buyer. Will be back on it this weekend so will give you a shout when its stripped.
Thanks

Re: XM parts mk 1

Posted: Thu Aug 07, 2014 12:53 pm
by southerner
How you feeling Narinder, did you manage to find out what parts was needed