Hello again Y'all and help with a pug needed
Posted: Sun Jan 31, 2010 7:50 pm
Evening all,
so this is where you all went and hid.................
First off a Q about the step daughters PUG 106, (for all of you following the soap opera, she was thrown out of alky dads house as soon as she no longer had any Child maintenance value and now resides with us)
Anyway
Pug 106 X plate 1.1i zest 2 ( in other words lower than base model but with a zest shiny sticker)
The poor little thing froze in the cold snap, minus 9 and a what I thought was antifreeze was probably Tizer, meant the stat housing, hoses and rad turned to ice.
Coming home at 6am the temp warning light came on so did the manglement light and fan cut in ( no guage just a warning light)
1st port of call was the stat - changed, tested the old one and not working
Water now moving as it should around the system
temp light still on ( so as a temporary repair pulled the relay on the fan)
I have since changed the sensor on the stat housing and now the sensor on the block but still the same- although the manglement light is now off, the temp light and fan both live
Nearly all 106s had 3 sensors, the fan and warning light controlled by the block sensor and another in the side of the rad.
The basic zest model does not have the rad sensor - I have tried the 106 forums but as most are spotty 17 year old asking " My exhuast sounds loud and scrapes on the floor, whats wrong?" I have given up
In typical PSA style its not going to present a big problem until summer but defies logic
Anyway, yes I would still like an XM, Danny @whm is only down the road and I am so tempted, but alas pennies do not permit. nor does space
Right off for some vin rouge and foodings
TTFN
Mark
From 'kin cold sicks of suffolk witha stupid dog that needs a wee at 5am
so this is where you all went and hid.................
First off a Q about the step daughters PUG 106, (for all of you following the soap opera, she was thrown out of alky dads house as soon as she no longer had any Child maintenance value and now resides with us)
Anyway
Pug 106 X plate 1.1i zest 2 ( in other words lower than base model but with a zest shiny sticker)
The poor little thing froze in the cold snap, minus 9 and a what I thought was antifreeze was probably Tizer, meant the stat housing, hoses and rad turned to ice.
Coming home at 6am the temp warning light came on so did the manglement light and fan cut in ( no guage just a warning light)
1st port of call was the stat - changed, tested the old one and not working
Water now moving as it should around the system
temp light still on ( so as a temporary repair pulled the relay on the fan)
I have since changed the sensor on the stat housing and now the sensor on the block but still the same- although the manglement light is now off, the temp light and fan both live
Nearly all 106s had 3 sensors, the fan and warning light controlled by the block sensor and another in the side of the rad.
The basic zest model does not have the rad sensor - I have tried the 106 forums but as most are spotty 17 year old asking " My exhuast sounds loud and scrapes on the floor, whats wrong?" I have given up
In typical PSA style its not going to present a big problem until summer but defies logic
Anyway, yes I would still like an XM, Danny @whm is only down the road and I am so tempted, but alas pennies do not permit. nor does space
Right off for some vin rouge and foodings
TTFN
Mark
From 'kin cold sicks of suffolk witha stupid dog that needs a wee at 5am