L592 EVN formerly J2 CXM
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: My new project
Question. How do you get a loose brake disc when the wheels are bolted THROUGH the disc and therefore hold tight the wheel and disc onto the hub..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
-
- Global Moderator
- Posts: 13818
- Joined: Thu Jun 18, 2009 6:44 pm
Re: My new project
I did wonder that.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
-
- Global Moderator
- Posts: 13818
- Joined: Thu Jun 18, 2009 6:44 pm
Re: My new project
On the Xm:
You car dives due to the Hydractive not working, which is why it has Cx spheres fitted. Make the Hydractive system work, fit the correct spheres and the ride and handling will be better than the C5.
Tyres. There may have some cracks in the root of the tread, but they have just been through an Mot test, without being advised on, so will be perfectly safe.
I too find the HP18 gearbox really doesn't suit the 2.1Td due to it holding lower gears and making the engine buzzy. Due to the gear changes being road speed goverened it won't change up and won't engage 4th until 50mph.
You may find new engine mounts makes a considerable difference to the transmitted noise.
I thought you were going to do both front leak off pipes when the left one split. They generally fail together.
Keep working on the car and it will improve.
You car dives due to the Hydractive not working, which is why it has Cx spheres fitted. Make the Hydractive system work, fit the correct spheres and the ride and handling will be better than the C5.
Tyres. There may have some cracks in the root of the tread, but they have just been through an Mot test, without being advised on, so will be perfectly safe.
I too find the HP18 gearbox really doesn't suit the 2.1Td due to it holding lower gears and making the engine buzzy. Due to the gear changes being road speed goverened it won't change up and won't engage 4th until 50mph.
You may find new engine mounts makes a considerable difference to the transmitted noise.
I thought you were going to do both front leak off pipes when the left one split. They generally fail together.
Keep working on the car and it will improve.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
-
- Knows how to use the parking brake
- Posts: 151
- Joined: Tue Apr 05, 2022 6:59 pm
- Orga / RP numbers: RP6043
Re: My new project
got new tyres fitted yesterday, goodyears
seem pretty good!
seem pretty good!
You do not have the required permissions to view the files attached to this post.
-
- Knows how to use the parking brake
- Posts: 151
- Joined: Tue Apr 05, 2022 6:59 pm
- Orga / RP numbers: RP6043
Re: My new project
so, the blower fan hasn't worked in the entire time i've had the car
today i was messing about with the controls, i put the switch to auto
cue a fizzing noise, smoke pouring from the passenger side dash
unfortunately, as i was pulling over i banged up a curb and hit a roadsign (one of the little portable ones) thankfully not much damage, in my panic i just pulled over immeditately
doesn't seem to be anything damaged, dash looks fine etc
removed the fuse and continued on my journey with no issues
i was feeling really good about this car, but this has really knowed it back a bit
today i was messing about with the controls, i put the switch to auto
cue a fizzing noise, smoke pouring from the passenger side dash
unfortunately, as i was pulling over i banged up a curb and hit a roadsign (one of the little portable ones) thankfully not much damage, in my panic i just pulled over immeditately
doesn't seem to be anything damaged, dash looks fine etc
removed the fuse and continued on my journey with no issues
i was feeling really good about this car, but this has really knowed it back a bit
-
- Has changed a sphere or two
- Posts: 272
- Joined: Wed Feb 12, 2020 6:47 pm
- Orga / RP numbers: 8032
Re: My new project
Sorry to hear this, hopefully it hasn't fried anything other than the fan resistor. I bought one off fleabay last year and it seems to be decent quality.
Worth lubricating the fan shaft while is out, mine still squeaks sometimes and it's really annoying.
Worth lubricating the fan shaft while is out, mine still squeaks sometimes and it's really annoying.
You do not have the required permissions to view the files attached to this post.
90 XM 2.0 Si manual RP4930 ETB Platinum
98 XM 2.1 VSX auto RP8032 EHJ Crimson Pearl
72 D Super 5 Black
72 DS21 efi Bleu D'Orient
98 XM 2.1 VSX auto RP8032 EHJ Crimson Pearl
72 D Super 5 Black
72 DS21 efi Bleu D'Orient
-
- Knows how to use the parking brake
- Posts: 151
- Joined: Tue Apr 05, 2022 6:59 pm
- Orga / RP numbers: RP6043
Re: My new project
I need to investigate what the cause is, I’m keen to get it fixed shortly as the C5 needs new brake discs and a rear suspension leak sorting so that’ll likely be a day or two so I’ll need to daily the XM in that time and wanting to get it bearable in the heat
Resistor is a good shout, I hope that’s the only victim, the amount of smoke surprised me
I’m rather disappointed in myself for hitting something, but I was in a state of panic at the time
Resistor is a good shout, I hope that’s the only victim, the amount of smoke surprised me
I’m rather disappointed in myself for hitting something, but I was in a state of panic at the time
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: My new project
First things first. Get the motor out from under the dash...
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
-
- Knows how to use the parking brake
- Posts: 151
- Joined: Tue Apr 05, 2022 6:59 pm
- Orga / RP numbers: RP6043
Re: My new project
I’ll get it out when I get the chance, doesn’t look too difficult, might pull it out tomorrow and inspect the damage
Never had this happen before still a bit shaken, going to buy a fire extinguisher tomorrow
Never had this happen before still a bit shaken, going to buy a fire extinguisher tomorrow
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: My new project
The blower is held in by 3 screws. One is right at the back. Can be hard to see.
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive