Page 3 of 3
Re: wanted, rear suspension cylinder and gaiter
Posted: Sun Jun 16, 2019 10:17 am
by Southerneruk
I been checking up a bit, it seems to me that all supension gaiters on the mk1 CX are the same, the cynliders peg/pin are different length (the bar that go's inside the ram and is sealed by the rubber gaiter where the r pin holds it in place are different in size.
vin number VF7Y3AT0001AT3654
Re: wanted, rear suspension cylinder and gaiter
Posted: Sun Jun 30, 2019 2:42 pm
by White Exec
See you're still looking.
Was this one no good?
https://www.chevronics.co.uk/product/re ... itroen-cx/
I see that they're also available here*:
https://www.pieces-de-rechange-classic. ... siere.html
* I've just ordered a pair for myself (2.5 rear, 95549188) from these folk. Have a very slight weep on one side on one of the folds.
Re: wanted, rear suspension cylinder and gaiter
Posted: Tue Jul 02, 2019 12:35 am
by Southerneruk
Well i am stuck here on what to do
Re: wanted, rear suspension cylinder and gaiter
Posted: Fri Jul 05, 2019 9:50 am
by White Exec
The pair of new 2.5 rears arrived from Pieces-de-Rechange-Classic this morning, within 72hours of ordering.
NFP item, but recent 'Citroen Classic' stock.
Re: wanted, rear suspension cylinder and gaiter
Posted: Sat Jul 06, 2019 10:37 am
by Southerneruk
Well Gaitors we now know we can get hold of easy enough, now for the rest the o rings and scaper ring are no longer made also, so it will need to be good seconds or good copy of those rings, the only other choice that i am looking into, is replacement of the whole cylinder, piston ram, rod, rings and gaitor all in one go. I found 2 cx estates in a scrapers that have the same cylinders as the XM estate
Re: wanted, rear suspension cylinder and gaiter
Posted: Sun Aug 11, 2019 10:22 am
by Southerneruk
All sorted now, thanks every one for your help
Re: wanted, rear suspension cylinder and gaiter
Posted: Sun Aug 11, 2019 10:29 am
by Dieselman
Is the car now back on the road?