Page 3 of 3

Re: Window regulator needed.

Posted: Wed Aug 31, 2022 12:42 pm
by m0rda
Yes, I understand it is - all the circuitry for the rear windows is missing. Only things I had, were the console buttons, which were just hanging in the air. Judging by that, I thought that rear windows were electric, but they were actually not. My mistake :(
At the moment, I have all the buttons, relays and rear-left winder.
The most interesting will be to find points "9/B4", "9/B1" and "13/A2", to which the relay 810 and backlight connect to.

Re: Window regulator needed.

Posted: Wed Aug 31, 2022 2:05 pm
by citroenxm
I should have a spare harness somewhere i stripped a v6 sei and a 2.1 sed both with rear power windows.

Finding the harness or at least identifying it is another thing.

Re: Window regulator needed.

Posted: Wed Aug 31, 2022 3:02 pm
by m0rda
The only hint I might have is that there should be these 5-pin connectors:

conn2.jpg

These are connectors to door buttons.

Re: Window regulator needed.

Posted: Wed Aug 31, 2022 3:51 pm
by citroenxm
Yea they are the door ones.. the centre console ones are the same as the dash switches ...

Re: Window regulator needed.

Posted: Thu Sep 01, 2022 7:07 am
by Dieselman
citroenxm wrote:
Wed Aug 31, 2022 2:05 pm
I should have a spare harness somewhere i stripped a v6 sei and a 2.1 sed both with rear power windows.

Finding the harness or at least identifying it is another thing.
Are S1 and S2 harnesses the same?

Re: Window regulator needed.

Posted: Thu Sep 01, 2022 7:09 am
by Dieselman
m0rda wrote:
Wed Aug 31, 2022 12:42 pm

The most interesting will be to find points "9/B4", "9/B1" and "13/A2", to which the relay 810 and backlight connect to.
I've not checked, but iirc, the relay plugs into the main fues/relay board and the connections are from that board and behind the radio, as said by citroenxm.

Series 2 circuit diagrams.

https://www.club-xm.co.uk/forum/downloa ... hp?id=9711

Re: Window regulator needed.

Posted: Thu Sep 01, 2022 7:15 am
by m0rda
Dieselman wrote:
Thu Sep 01, 2022 7:07 am
Are S1 and S2 harnesses the same?
Buttons are the same, for sure. The difference might be in motor connectors, as S2 and S1 motors are different.
However, I haven't had a chance to compare, as was an owner of S1 or S2, but not both at the same time.
I would say, for my purpose, S1 harnesses would do, as I only don't have console button connectors.