Citroen XM Forum

Anyone know an online source for replacement rubbers for the top drivers side engine mount on a 2.1SED?

I'm getting a "clonk" when I pull away at roundabout, and I think it is the centre rubber that has split allowing the engine to move - but may as well replace both rubbers while I'm in there.

If you find one let me know, I have two doing something similar, I get a vibration when the engine is under load.

Peter

.
Is it anything like this.........

http://cgi.ebay.co.uk/CITROEN-ENGINE-MO ... 33517c62bb

I know it fits the TCT because I bought one, but not sure about other engines.

If it's not the right one, try this seller's shop, he has a lot ot other bits.

Paul

.

Looks similar to that one, Paul, but that is listed for the bottom left mount - whereas mine is the top right mount.

It might fit, but no dimensions on there.

boyse7en wrote:Anyone know an online source for replacement rubbers for the top drivers side engine mount on a 2.1SED?

I'm getting a "clonk" when I pull away at roundabout, and I think it is the centre rubber that has split allowing the engine to move - but may as well replace both rubbers while I'm in there.

Are these what you both need? Bob.

http://cgi.ebay.co.uk/CITROEN-LEFT-ENGI ... 4a979a68ce

No, there bottom ones, but its nice to know you cam get them, I had to get mine from Citroen.

Peter

I replaced all my engine mounts not too long back with (pricey) citroen originals but felt no benefits drive-wise

Colin.P

Plenty to go around and at a nice price too!
http://cgi.ebay.co.uk/CITROEN-FRONT-LEF ... 0401206778

Thing is, is it top left as you look into the engine bay, or whilst you're looking out driving!?

Andrew

not a bad price for the gearbox mount that, may get one to put in the turbo conversion box

D

I'm sure that's the gearbox mount.

This one should be the main engine mount at the cam-belt end. http://cgi.ebay.fr/Support-moteur-Citro ... 3ca532eefa